Acid Bass with Accents Using Ring Mod
Create the accents:
1: MIDI Trig to Ring Mod.
2: MIDI Velocity to Ring Mod.
3: Ring Mod to Mixuverter main input.
4: Set the 2x switch to 1x. Set the polarity switch to unipolar.
5: Mixuverter to ENV-A gate.
6: ENV-B to VCF FM-3.
7: ENV-A is being used for accents, so patch ENV-B to VCA-A level.
The Ring Mod is being used like a VCA. Triggers are attenuated by velocity using the Ring Mod. The Mixuverter attenuator sets the signal above or below value necessary to trigger the envelope. Notes with a velocity above this threshold will pass to the envelope triggering an accent. Turn CW to trigger more accents. Turn CCW to trigger fewer accents.
Add slew:
1: MIDI Pitch to Slew.
2: Slew to VCO A Pitch.
Add drive and distortion:
Adjust drive to taste. For a dirtier sound try adding some feedback.